Installation precautions for RF admittance level switches

　　The RF admittance level switch replaces capacitance measurement with more advanced RF admittance technology, solving the problem of material adhesion.

　　Compared with other similar products, it has higher system stability and can work reliably even under extremely harsh on-site conditions.

　　The following is a list of installation precautions for RF admittance level switches.

　　When installing radio frequency admittance materials in a moisture-proof position, when the instrument is installed outdoors or in an environment with moisture, please bend and lead the cable downwards before connecting it.

　　In case of rain or condensation, rainwater and condensate will flow downwards to prevent moisture from entering the instrument.

　　When installing, avoid the feeding port. When selecting the installation position of the RF admittance level switch, measurement errors caused by installation at the feeding port position should be avoided, and even damage to the instrument should be avoided.

　　Pay attention to the insertion depth of the RF admittance level switch protection pole.

　　To ensure the anti adhesion function of the instrument, the size of the probe protection pole inserted into the silo should be greater than 50mm during instrument installation.

　　When the probe is installed horizontally, an angle of 20o should be formed with the horizontal plane downwards to reduce material impact and increase sensing sensitivity;

Read recommendations:

Waveguide circulator

rf signal combiner

rf venue iem combiner

dual band omni antenna.The development trend of RF hybrid combiners

Next generation signal processing technology for n-type separators