Potentiometer sensor features

　　(1) The resistance body can be made of solid type or film type, circular arc or linear shape, the surface is smooth and almost mirror-like, the smoothness is quite good, and the resolution is extremely excellent.

　　(2) There is almost no friction between the contact brush and the resistor. The rotating force is short and constant, and there is almost no wear problem, excellent wear resistance, wear resistance life is very long, when the contact pressure of the contact brush is 50-100g, the speed is 30 weeks/second, it can be detected, conductive plastic potentiometer, the method is as high as 10*7 weeks, and some detection even 10*8 weeks, the dynamic noise is very small, and the reliability is very high.

　　(3) Linear accuracy, usually independent linearity is the most appropriate, generally 2%, after modification can be increased to more than 0.5; A potentiometer with an arm diameter of
22 can reach 0.05%.

　　(4) Because the resistance body can be designed into a cross-sectional conductive plastic potentiometer, the method area size and shape of different components, detection, therefore, its rated power consumption can reach 2-3 watts.

　　(5) Melting corrosion, anti-atomic radiation.

　　(6) Compared with other non-total potentiometers, the production process is simple and less polluted by the environment.

Read recommendations:

rf splitter combiner

sma circulator

circulator microwave

Tuning fork level switch wholesale introduces the application of tuning fork level switch

rf splitter 3 way.RF duplex isolation degree