Tuning fork level switch RF sensor wholesale acceptance

　　Tuning fork level switch RF sensor is a commonly used sensor, widely used in petroleum, chemical, pharmaceutical, food and other industries, for the detection of material level, powder and particle level. So, after the tuning fork level switch RF sensor you purchased arrives, how to carry out acceptance?

　　1. Check appearance

　　It is necessary to check the appearance of the RF sensor of the tuning fork level switch, including checking whether the housing is deformed or discolored. Similarly, it is also necessary to check the sensor for obvious signs of tapping, dropping, etc.

　　2. Check cable connections

　　Second, the wiring of the tuning fork level switch RF sensor needs to be checked. First of all, you need to check whether the wiring port is the same as that in the manual, and whether the wiring is tight and firm. At the same time, it is necessary to check whether the voltage and current of the switch are consistent with the instructions, and check whether the fuse of the switch exists.

　　3. Function check

　　The function of the tuning fork level switch RF sensor needs to be checked. First of all, you need to check whether the sensitivity of the switch meets the requirements. Then, the switch needs to be placed in different substances to test whether the switch is working normally. If it works normally, it means that the tuning fork level switch RF sensor can be used normally.

Read recommendations:

coax cable attenuator

cb rf filter

yaesu system 600 hf transceiver

RedCap technology standards accelerate the development and innovation of 5G IoT

3 way power divider