What is the oil-water interface instrument used for?

　　How to wire the RF admittance level switch?

　　Radio frequency admittance level switches are suitable for measuring materials such as fly ash, solid particles, and adhesive media, and are widely used in industrial production, food processing, and mineral and coal industry development. So how to wire the RF admittance level switch? Now let's introduce it to everyone.

　　Radio frequency admittance level switches are widely used in the industrial field and are commonly used as auxiliary devices for liquid level, level limit, alarm, etc. From a safety perspective, wiring can only be carried out in the event of a power outage; Before connecting power, please check if the connected power supply meets the type and range indicated on the instrument nameplate.

　　Wiring method for RF admittance level switch: Unscrew the upper cover of the housing, thread the signal lead through the sealing packing box or explosion-proof steel pipe sealing joint, and extend it into the housing from the right wire port. Connect the leads to the corresponding wiring terminals on the upper part of the unit and confirm that they are correct. Adjust the lead length to the appropriate size and tighten the sealing packing box or explosive steel pipe sealing joint. Tighten the cover on the housing.

　　The wiring steps of the RF admittance level switch: Open the outer shell cover; Loosen the locking nut on the cable threaded joint; Remove approximately 10cm of the outer sheath of the connecting cable and approximately 1cm of the insulation layer at the end of the core wire; Insert the cable through the cable threaded joint into the casing; Open the wiring terminals with a screwdriver; Insert the end of the core wire into the terminal according to the wiring diagram; Use a screwdriver to tighten the wire terminals; Check if the wiring is secure by gently pulling the connected cable; Tighten the locking nut of the cable threaded joint and tighten the sealing ring tightly; Screw on the housing cover.

Read recommendations:

baw and saw filters

Digital optical fiber repeater

8 way power splitter

coax cable attenuator.Front to back ratio of antenna

Sensor application scenarios.best omni directional 4g antenna