airmax omni 5ghz 13dbi antenna.Instructions for the manufacturer of oil-water interface tester

　　The oil-water interface meter is an instrument used for measuring the interface between two liquids. It is an instrument that can continuously measure changes in the oil-water interface and is an indispensable and important sensor in fine chemical production. So what are the instructions for using this instrument? Below, the manufacturer of the oil-water interface instrument will introduce it to you.

　　The oil-water interface instrument product adopts the principle of microwave oil-water measurement. There are no mechanical movable parts when the interface instrument works, and the overall instrument has a rigid structure with high measurement resolution, stable and reliable operation, good repeatability of measurement values, and maintenance free operation. The advantages of the two liquid interface measurement technology are obvious, and it surpasses and surpasses the differential pressure buoyancy instrument in terms of oil-water interface measurement accuracy and medium applicability. The oil-water interface instrument can adapt to the measurement of two liquid interfaces in the fields of fine chemical, petrochemical, coal chemical, pharmaceutical production, new energy, and scientific research.

　　The manufacturer of the oil-water interface instrument reminds that the instrument should be sealed and moisture-proof during installation and use. Oil and air have similar measurement properties. The distance between the measuring rod and large metal structural components should be greater than 20mm. The working power supply and control power supply should meet the voltage level requirements of the oil-water interface instrument. The control output cannot be short circuited. Default output state: C1 and C2 open circuit when the oil-water interface is below the lower limit, and C1 and C2 short circuit when it is above the upper limit. Maintain the original state between the high and low limits. Making "output settings" can reverse the output status. The metal container should be grounded, and the instrument casing should be electrically connected to the metal container.

　　Oil water interface meter is a liquid level level transmitter that can be used for liquid, solid, interface and measurement. It has the advantages of stable and reliable long-term operation, high sensitivity, good linearity, high temperature resistance, and high pressure resistance. Mastering the instructions for using the oil-water interface tester can ensure better operation and better performance. If you have any questions, please consult the manufacturer of the oil-water interface tester.

Read recommendations:

combining rf signals

868 mhz cavity filter

baw rf filter

coaxial fixed attenuator.RF attenuator performance optimizer

Infrared sensor.rf filter applications