1. Terminal connection: Connect the coaxial data terminal YTMC-51N4-A1 to a computer or other device through a coaxial cable.

　　2. Open browser: Open your commonly used web browser on the connected device, such as Google Chrome, Mozilla Firefox, or Internet Explorer.

　　3. Enter IP address: Enter the IP address of the terminal in the address bar of the browser. Normally, the IP address of a coaxial data terminal is 192.168.0.1 or 192.168.1.1. If you are unsure of the IP address of the terminal, please refer to the terminal's user manual or contact the manufacturer of the terminal to obtain the accurate IP address.

　　4. Press Enter: After entering the IP address, press Enter on the keyboard, and the browser will attempt to connect to the terminal's homepage.

　　5. Enter login information: If the terminal has set login information, the browser will pop up a login page, and you need to enter the correct username and password to access the terminal's homepage. Similarly, the default values for usernames and passwords can usually be found in the terminal's user manual or the manufacturer's official website.

　　6. Enter the homepage: After successfully logging in, you will be able to access the homepage of the coaxial data terminal, which includes various settings and configuration options.

Read recommendations:

coax cable attenuator

isolator microwave

rf bandpass filter

omni antenna 2.4 ghz 20dbi.Applications of RF Filters in Consumer Electronics

Principle of Radio Frequency Filters