1. Prepare for installation

　　Before installing the RF admittance level switch, you must accurately understand the nature, shape, size, and environmental conditions of the measuring object, determine the installation mode, position, and Angle of the sensor, and design according to the working principle of the device.

　　2. Select the installation position

　　The installation position of the RF admittance level switch is crucial for accuracy and stability. In general, the sensor should be installed above the low point of the liquid level or loose material to avoid measurement errors. At the same time, it should be noted that the distance between the sensor and the liquid or loose material can not be too short or too long, generally in the range of 30-50mm is better.

　　3. Installation method

　　The installation of the RF admittance level switch is a relatively simple process. First of all, the welding size and position of the sensor should be determined according to the sample drawing or process drawing provided by the manufacturer, and the fixed part and the sensor should be pasted well. Then connect the terminal to the controller to complete the installation.

Read recommendations:

high power rf combiner

Broadband isolator

high power rf circulator

tunable rf bandpass filter.RF Filter for Electronic Measurement Instruments

There are three principles and methods for selecting the sensor of the photocoupling relay RF