There are two installation methods for tuning fork level switches, one is horizontal installation and the other is vertical installation. From most current working conditions, it can be seen that tuning fork level switches are generally installed horizontally. The following two issues need to be noted during installation:

　　1. Tilt angle

　　When the tuning fork level switch is installed horizontally, it should be noted not to install it too horizontally. At least a tilt angle of 15-30 should be maintained to prevent the tuning fork level switch from hanging materials and causing false alarm actions.

　　2. Stay away from the discharge port

　　The tuning fork level switch cannot be installed at the discharge port during installation. If the material is too large, it may cause damage to the tuning fork level switch. If the material is discharged too quickly, the tuning fork level switch may also display a false alarm state.

Read recommendations:

mfj 915 rf line isolator

qualcomm saw filters

Drop in isolator

omnidirectional wifi antenna

Aviation Radar RF Filter