Oil-water interface instrument is a sensor used to measure the height change of continuous oil-water interface on line. Oil-water interface instrument is an instrument used to detect the separation of oil and water in liquid. Here is a look at the use of oil-water interface instrument manufacturers.

　　The use of oil-water interface instrument:

　　1, installation and use, pay attention to seal moisture.

　　2. Oil and air have similar measurement properties.

　　3, the distance between the measuring rod and the large area of metal structural parts should be greater than 20mm.

　　4, the working power supply and control power supply should meet the requirements of the electric pressure level of the oil-water interface.

　　5, the control output can not short circuit. Default output status: C1 and C2 are open when the oil-water interface is lower than the lower limit; C1 and C2 are short circuit when the oil-water interface is higher than the upper limit. Stay in place between high and low limits. Do Output Settings to reverse the output state.

Read recommendations:

isolator microwave

rf high pass filter

diy rf filter

Composition of RF admittance level gauge.Miniaturized broadband transceiver

The working principle of RF circulator