Where is the tuning fork level switch RF sensor installed

　　Tuning fork level switch RF sensor is a non-contact level switch RF sensor, which determines the presence or absence of material by measuring vibration frequency. This kind of switch is often used for level detection of powder or granular materials, and has the advantages of fast response, high sensitivity and wide application range

　　So, where should we install the tuning fork level switch RF sensor?

　　In general, the tuning fork level switch RF sensor should be installed in contact with the material. For the storage or conveying of powder or granular materials, it is usually installed under the silo or at the feed port. For fluids, you can choose to install them in pipes or tanks. It should be noted that the installation position should be free from vibration and interference.

　　Note the following points when installing:

　　1. Confirm the installation location: When selecting the installation location, you should fully understand the characteristics of the material, the structure of the storage equipment and the process requirements.

　　2. Installation method: The installation method of tuning fork level switch RF sensor usually includes flange installation and thread installation. The appropriate method should be chosen according to the actual situation.

　　3. Installation Angle: The installation Angle should make the vibration axis of the tuning fork perpendicular to the direction of the material flow, and in the horizontal plane perpendicular to the ground. At the same time, it should be ensured that it is not affected by external vibration or shock.

　　4. Wiring: Wiring should be carried out in accordance with the requirements of the manual, and the wiring should be reliable and not easily disturbed.

Read recommendations:

yaesu system 600 hf transceiver

microstrip circulator

power divider in microwave

16 way power divider.The function of an isolator

What is the principle and definition of dual potentiometer sensor