The termination type is mainly designed based on its application scenario, required performance, and the characteristics of the cable itself. Although the specific termination type may vary depending on the manufacturer, industry standards, and user needs, the following are some common coaxial cable termination types and their characteristics:

　　1. Crimp Termination

　　Features: The sleeve part of the connector (such as a BNC connector) is crimped onto the outer conductor (braided shield or aluminum foil) and insulation layer of the coaxial cable by a crimping tool, while ensuring that the center conductor has good contact with the center pin of the connector.

　　Application: Widely used in video transmission, RF signal connection and other fields, such as CCTV systems, antenna feeders, etc.

　　2. Solder Termination

　　Features: Connect the connector to the center conductor and outer conductor (if applicable) of the coaxial cable by welding. This method requires high manual skills to ensure the quality and reliability of the welding point.

　　Application: Suitable for application scenarios that require high reliability and long life, such as aerospace, military communications, etc.

　　3. Threaded Termination

　　Features: The connector is fixed to the coaxial cable through a threaded connection, usually including a rotatable nut and a connector fixed to the cable. This method provides good mechanical stability and electrical connection performance.

　　Application: Commonly used in scenarios that require frequent connection and disconnection, such as test equipment, antenna installation, etc.

　　4. Plug-in Termination

　　Features: The coaxial cable is connected to the circuit board or device using a special plug-in or module. This method simplifies the connection process and improves the flexibility and maintainability of the connection.

　　Application: Widely used in communication equipment, computer networks and other fields.

　　5. Custom Termination

　　Features: A termination method designed and manufactured according to specific needs, which may involve special connectors, cable processing processes or installation methods.

　　Application: Suitable for application scenarios with extremely high performance requirements or special configurations, such as high-precision measurement systems, high-end audio and video equipment, etc.

　　It should be noted that the termination type of coaxial cable not only affects its electrical performance and mechanical stability, but also the ease of installation and maintenance. Therefore, when choosing the termination type, it is necessary to comprehensively consider factors such as application scenarios, performance requirements, cost budget, and maintenance convenience.

　　In addition, with the development of technology and the advancement of the industry, new coaxial cable termination types are constantly emerging. Therefore, it is recommended to refer to the latest industry standards and best practices recommended by manufacturers in actual applications.

Read recommendations:

800M fiberglass omnidirectional antenna

RF circulator

ceramic rf filters

Omnidirectional LTE antenna coverage in all directions

microstrip filters for rf microwave applications